12 Volt/24 Volt 4x6A LED-strip RGBW-Controller (without remote)
Delivered within 1 working day
- Free shipping within NL for € 100+ orders
- B2B only
- Delivery within 1 working day
Do you need advice for your ideas, complex questions and projects.
- +31 (0) 40 - 202 4904
- Mon-Fri: 8:00 - 17:00
Four-channel RGBW LED-strip controller allows four colors (Red, Green, Blue and White) can be triggered separately from one another.
- wireless control
- brightness adjustable
- color adjustable
- program selection
- 4 zones to control with one remote
- UL (E344776) and CE certified, CE, EMC and LVD approved, RoHS
This is a 4-channel RGBW controller and makes it possible to have 4 colors (Red, Green, Blue, and White) to separately control each other. There are 4 individual channels that can be loaded up to 5A max. Each. Maximum output power is 480W. The controller remembers the set color and brightness even after turning off the power supply.
This is a very suitable controller for various purposes. Eg as mood lighting, disco or party lights, or just interior. Because of the extra 4th channel, it is possible to add a white or warm white color. This in combination with the remote control makes it possible to quickly switch between a quiet, relaxing warm white color to a red, green or blue color.
In order to allow the controller to work on the remote control, these first have to be linked. You can do this by removing the voltage of the controller. Then if the voltage on the controller will put press the On button in the corresponding zone. The LED-strips on the outputs now a number of times on and off. If by mistake the wrong zone is selected, the controller and the remote control are disconnected first. This is done by the tension on the controller is put to press the upper On button and hold. The outputs go several times on and off and the zone can be reset by removing the voltage of the controller. Then the voltage on the controller and the On button of the zone press.
The controller has a terminal strip for the 2-wire power cord and the LED-strip 5 connections. (+ (Anode), R - (cathode), G - (cathode), B - (cathode), W - (cathode)).
The two wires for power supply:
- Input + (positive power in)
- Input - (negative power in)
The 4 wires for the LED strip or LED modules are:
- V + (Common-Anode, shared +)
- red V
- green V
- blue V
- White / Warm White V-
RoHS 2002/95/EC Compliant
EMC 2004/108/EC Compliant
Dimmer / controller
Controller 4 channels
Number of channels
Output current per channel
85 x 45 x 22.5mm
Pro's and Cons
Wireless by RF Communication
Control by APP and remote control
Small total capacity