Luxalight Long Life LED Strip WS2812 12V Digital RGB Protected High Power (12 Volt, 96 Leds, 5050, IP64)
|5||10 %||€ 41,36|
|15||15 %||€ 39,06|
|25||20 %||€ 36,76|
|50||25 %||€ 34,46|
|100||30 %||€ 32,17|
- Free shipping within NL for € 100+ orders
- Delivery within 1 working day
Order customized LED strips
At Ledtuning you can have your LED strip customized.
Expertly crafted by our engineers, tested and directly installable.
Do you need advice for your ideas, complex questions and projects.
- +31 (0) 40 - 202 4904
- Mon-Fri: 8:00 - 20:00
These LED strips are fitted with the special WS2812 12V LEDs with an embedded controller chip that allows each LED to control color and brightness separately.
This does not require complex wiring plan, these LEDs are serially controlled by a specially designed microcontroller. With only three wires the strip can be controlled: Ground, +12 V (note the current!) And a serial data signal.
On the strip itself, between the LEDs this serial information is transfered from the serial output of one LED to the serial input of the next LED. It is thus possible for any length LED strip colors to come true at the beginning and end of each other, or even to create a display that can display (moving) images. This digital LED-strip is perfect to control whith a Arduino , Raspberry Pi or T1000 controller
Both RGB LED chips and the microcontroller are integrated in the housing SMD 5050, and together form a complete digital controllable full-color pixel. The LED has a built-in signal conditioning circuit to transfer the digital signal distortion free to the next LED input.
Built-in reset circuit and power lost reset circuit. Built-in electric reset circuit and power lost reset circuit. Each pixel of the three primary color can achieve 256 brightness levels (16.7 million color) full color display, and scan frequency not less than 400Hz/s.
Cascading port transmission signal by single line.
The LED used here is the WS2812B, so 4-pin SMD 5050 package, for each color dual-chip thus exra high light output.
When the refresh rate is 30fps, low speed model cascade number are not less than 512 points, high speed mode not less than1024 points. Send data at speeds of 800Kbps. The color of the light were highly consistent.
Applications are for LED decorative lighting and indoor/outdoor LED video screen.